top of page

How to Fit Scotia Trim: A Simple Guide for Hybrid and Laminate Floors

Nov 7
2 min read

Quick answer: Scotia is a small curved trim that covers the expansion gap where a floating floor meets the skirting. To fit it, measure each wall, cut the corners at 45°, and fix the scotia to the skirting board, not the floor, with panel pins or adhesive. A colour-matched scotia makes the join almost disappear.

What scotia is for

Floating floors like hybrid and laminate need a small gap around the edges so they can move a little with the seasons. Scotia covers that gap neatly, so you can keep your existing skirting boards instead of taking them off. That saves time, money and mess. See scotia vs new skirting for the full comparison.

Colour-matched scotia trim for hybrid flooring
Colour-matched scotia trim for hybrid flooring

How much scotia you need

  1. Measure every wall the floor touches, in metres, and add them up.

  2. Take off the doorways (about 0.8m each).

  3. Add about 10% for corner cuts and offcuts.

  4. Divide by 2.4 (the length of each piece) and round up.

Example: a 4m × 5m room has 18m of wall. Take off one doorway (0.8m) for 17.2m, add 10% for about 19m, and divide by 2.4. That's 8 lengths.

What you'll need

  • Scotia in your floor's colour, plus a few spare lengths.

  • A mitre saw or mitre box and a fine-tooth saw.

  • Panel pins and a nail punch, or a construction adhesive that suits timber and painted surfaces.

  • Matching filler or flexible caulk, a tape measure and a pencil.

How to fit it

  1. Start in a corner. Cut the first piece square at the doorway end and at 45° at the corner end.

  2. Cut corners at 45°. Internal corners: the back of the scotia is longer. External corners: the face is longer. Test the pair before you fix them.

  3. Join long walls with a 45° scarf joint rather than a square butt joint. It's much less visible.

  4. Fix to the skirting, not the floor. Pin or glue the scotia to the skirting board so the floor can still move freely underneath.

  5. Punch and fill the pins, then run a thin bead of caulk along the top edge if your skirting is painted.

Getting the colour right

  • Match the floor for a seamless look. Our scotia is colour-matched to our hybrid and laminate ranges.

  • Match the skirting (usually white) if you'd rather the scotia blends into the wall.

  • Not sure? Hold your floor sample against your skirting. If the floor is the hero, match the floor.

Coastal Blackbutt SPC hybrid in a bedroom, installed by Reno Flooring in Minnie Water NSW
Coastal Blackbutt SPC hybrid in a bedroom, installed by Reno Flooring in Minnie Water NSW

Read more

Next steps

 
 
 

Comments


Ready when you are

Measured, quoted and installed.

Book a free measure and we’ll come to you, check the subfloor and give you a written quote. No obligation.

Free samples

See it in your own light.

Order up to 3 free samples and compare them at home, next to your walls and furniture.

bottom of page