top of page
Silver foil foam underlay 2mm for laminate and floating floors

ACCESSORIES · UNDERLAY

Flooring underlay

Underlay is the thin layer between the subfloor and a floating floor. It evens out small bumps, quietens footsteps, adds a little warmth, and on a concrete slab it keeps moisture away from the boards. Which underlay you need depends on the floor: hybrid has it attached, while laminate underlay and engineered oak underlay are bought separately. Here's what to buy, how much, and what to put on a slab.

01

Does your floor need underlay?

  • Hybrid (SPC): no. Every hybrid we sell has an acoustic underlay bonded to the back. Don't add a foam underlay; it makes the click joints flex and fail. On concrete, add a moisture barrier only.

  • Laminate: yes. A 2mm foam underlay under every board.

  • Engineered oak (floating): yes. A 2mm foam underlay, and a moisture barrier on concrete.

02

Our underlay

  • Silver Foil Foam Underlay 2mm — foam with a foil layer, for laminate and engineered floors. One box covers 20m². The foil adds a moisture-resistant layer, so on a timber or particleboard subfloor it's the only underlay you need; on concrete, add the barrier below as well.

  • Flooring Protection 2mm — plain foam underlay for laminate and floating floors over a dry timber subfloor or where a separate moisture barrier is going down anyway. One box covers 20m².

  • Moisture Barrier Film 200µm — a heavy plastic film installed under hybrid, laminate or engineered floors on a concrete slab. One roll covers 100m². Overlap joins 200mm and tape them.

03

How much underlay to order

Underlay covers the same area as the floor before cutting allowance: your room m² plus about 5%. A 60m² home needs four boxes of 2mm underlay (80m²) or three if you're careful with offcuts, and one roll of moisture barrier. The flooring calculator adds it for you.

04

Concrete slabs

Concrete breathes moisture upward, even in an old house, even on the top floor. Under hybrid, lay the moisture barrier film straight on the slab, overlapped and taped, then the hybrid on top. Under laminate or engineered oak, lay the barrier first, then the foam underlay, then the floor. If the slab is new (under 12 months) or you've had damp problems, a moisture test before you start is cheap insurance; our installers do it as part of a free measure in the areas we service.

05

Upstairs and apartments

Strata buildings often specify an acoustic rating for hard floors. Hybrid with its attached underlay plus the 2mm foam is usually not allowed (the foam goes under laminate only), so for apartments the answer is a 9.5mm hybrid, which has the thickest attached acoustic layer, or a laminate on an acoustic-rated underlay your body corporate accepts. Ask them for the rating they require before you buy.

06

What not to do

  • Don't double up underlay to make a floor feel softer; the joints will fail.

  • Don't put foam under hybrid.

  • Don't lay any underlay over carpet or carpet underlay; take it all up first.

  • Don't skip the moisture barrier on concrete to save a few dollars; it's the cheapest part of the job and the one that protects the rest.

Scotia · Trims and mouldings · DIY flooring guide

07

Underlay questions

Does hybrid flooring need underlay?

 

No. It's attached. On concrete, add a moisture barrier film only.

 

What underlay for laminate flooring?

 

A 2mm foam underlay under every board, plus a moisture barrier on a concrete slab.

 

How much does one box of underlay cover?

 

20m². A roll of moisture barrier covers 100m².

 

Can I use thicker underlay to make the floor quieter?

 

No. Thicker foam lets the click joints flex. For a quieter floor choose a thicker board (9.5mm hybrid or 12mm laminate) and add rugs.

 

Do I need a moisture barrier on a timber subfloor?

 

Usually not, if the subfloor is dry and ventilated. The foil underlay adds a moisture-resistant layer for peace of mind.

bottom of page