top of page
French Oak hybrid herringbone flooring

FLOORING GUIDE · HERRINGBONE

Herringbone flooring

Herringbone is the pattern that makes a room look finished before the furniture arrives. We sell herringbone floorboards three ways: a waterproof 9.5mm hybrid herringbone, a 9mm hybrid in the Obsidian range, and real engineered oak herringbone, with an engineered oak chevron too. Here's how to choose, what it costs to do properly, and how the pattern changes the install.

01

Hybrid or engineered herringbone?

  • Hybrid herringbone is waterproof, clicks together, and goes over existing tiles. It's the choice for kitchens, hallways and living areas, and for anyone who wants the pattern without a glue-down install. Elegant 9.5mm herringbone in six colours; Obsidian 9mm in Australian species.

  • Engineered oak herringbone is real timber, usually glued down, and can be sanded and refinished. It's the premium option for living rooms, bedrooms and hallways where water isn't an issue. See the engineered herringbone ranges.

02

How herringbone is installed

The boards are short and installed at right angles in a zig-zag. The first rows are set out from a centre line so the pattern runs square to the room, and everything else follows from there. Click hybrid herringbone floats like a normal floor but uses left- and right-hand boards (the boxes are marked A and B), so you buy equal numbers of each. Engineered herringbone is normally glued to the subfloor, which must be flat and dry. Setting out is the skill; the rest is patience.

03

Allow 20% for cuts

Every edge of a herringbone room is a row of angled cuts, so the waste is higher than a straight floor: allow 20% instead of 10%. The calculator has a herringbone setting that does this and rounds to full boxes. A border row around the room (a plank frame) is a classic finish that also hides the angled cuts.

04

What herringbone costs

Per m², herringbone boards cost more than the same range in planks because of the extra manufacturing, and you're buying 20% more of them. Hybrid herringbone is the affordable way in; engineered oak herringbone is the premium. Prices per m² ex GST are on each product page and update with the store. Installation, where our team does it, is quoted after a free measure, and herringbone takes longer than planks, so expect that to show.

05

Colours that suit the pattern

Herringbone shows off grain and tone variation, so lighter oaks (French Oak, Lime Ash) read as airy and Scandinavian; Spotted Gum and Blackbutt look rich and Australian; greys suit modern apartments. Order three free samples and lay them in a V on the floor: the pattern changes how a colour looks.

06

Where it works best

Entries and hallways (the pattern leads the eye), living rooms, and open-plan kitchens in waterproof hybrid. In a small room, a lighter colour and a border keep it from feeling busy. Herringbone on stairs is possible with planks of the same range on the treads.

07

Herringbone flooring questions

Is herringbone flooring more expensive?

 

Per m², a little more than planks in the same range, and you need about 20% extra for cuts. Installation also takes longer.

 

Can herringbone hybrid go over tiles?

 

Yes. Click hybrid herringbone floats over flat, solid tiles like any hybrid.

 

Is hybrid herringbone waterproof?

 

Yes, the SPC core is waterproof, which is why it's the herringbone we recommend for kitchens.

 

How much extra do I order for herringbone?

 

20%. And equal numbers of A and B boxes for click hybrid herringbone.

 

Can I install herringbone myself?

 

Click hybrid herringbone, yes, if you're careful with the set-out. Engineered glue-down herringbone is a job for an installer. In our install areas, we do both.

bottom of page