How Much Does Hybrid Flooring Cost in Australia? 2026 Supply Price Guide
Quick answer: As at November 2026, good-quality SPC hybrid flooring costs $26.01 to $48 per m² supply only (ex GST) from our online store, delivered Australia-wide. A 60 m² living area with 10% for cuts comes to about $1,717 for an entry 6.5mm hybrid, or about $2,525 for a 9.5mm plank with a 0.5mm wear layer. Installed prices depend on your home, so they come from a free measure and written quote.
What you're paying for
Hybrid prices move with four things, and once you know them the price tags make sense:
Thickness: a 6.5mm plank is cheaper than 8mm or 9.5mm. Thicker planks feel more solid and cope better with small dips in the subfloor. See our thickness guide.
Wear layer: 0.3mm is fine for bedrooms; 0.5mm is the family-and-dog grade. The thicker layer adds a few dollars per m² and years of life. Here's which wear layer you need.
Plank size and pattern: extra-long, wide boards and herringbone cost more to make and to pack.
Where you buy: showroom overheads end up in the price. Buying from a warehouse-based retailer online usually saves $10 to $30 per m² for the same spec.

Supply-only prices by type (November 2026)
Prices are per m², supply only and ex GST, taken from our live store.
6.5mm SPC hybrid, 0.3mm wear layer: from $26.01/m². Great for bedrooms, hallways and living areas over a flat slab.
9.5mm SPC hybrid, 0.5mm wear layer: from $38.25/m². Our pick for family homes, open-plan living and pets.
8mm extra-long and wide hybrid: from $48/m². Fewer joins, a more expensive timber look.
Herringbone hybrid: from $39.49/m². Allow 20% for cuts instead of 10%.
Every price on our hybrid flooring range updates automatically when we lower it, so what you see is what you pay.
A 60 m² worked example
Say you're doing a kitchen, dining and living area that measures 60 m². Add 10% for cuts and offcuts, so you order 66 m².
Entry 6.5mm hybrid: 66 × $26.01 = $1,716.66
9.5mm hybrid, 0.5mm wear layer: 66 × $38.25 = $2,524.50
Herringbone hybrid (20% waste, 72 m²): 72 × $39.49 = $2,843.28
Add trims to finish the edges. Scotia, stair nosing and transition strips are colour-matched to the floor and worked out for you on each product page. Our guide to measuring your rooms shows how to get the m² right in five minutes.
What about installation?
Installation is quoted per job, not per m² from a price list, because every home is different: the subfloor, how many rooms, doorways, stairs and whether the old floor stays or goes. The honest way to get a number is a free in-home measure and quote, where you get a written price for the floor and the install together. We install across Coffs Harbour, Grafton, Yamba, Port Macquarie and surrounding areas, and we'll beat any written quote by $1/m².
If you're handy, hybrid is also one of the easiest floors to install yourself. Our step-by-step install guide walks through it.

Five ways to keep the total down
Buy supply only and shop by the box. You pay for whole boxes, so pick a range whose pack size suits your rooms.
Go over the old floor. Hybrid can go straight over most tiles and concrete, which removes demolition and rubbish costs. See hybrid over tiles.
Match the wear layer to the room, not the whole house. 0.3mm in bedrooms, 0.5mm in the living areas if the colour exists in both.
Order samples first. Choosing right the first time avoids restocking fees. Order up to 3 free samples.
Watch the sale. We change the sale ranges every couple of months on our flooring sale page.
Next steps
See live prices on the hybrid flooring range.
Order up to 3 free samples, delivered Australia-wide.
Mid North Coast homes: book a free measure and quote for an installed price.


Comments