How Flat Does a Floor Need to Be for Hybrid Flooring? The Straightedge Test
Quick answer: Most hybrid and laminate floors need the subfloor to be flat to within about 3mm over 3 metres, and some ask for 2mm over 1 metre. Check with a long straightedge. Small dips can be filled and small bumps ground down before the floor goes in. Always follow the install guide for your chosen floor.
Flat is not the same as level
A floor can slope gently and still be perfectly fine. What matters for a floating floor is flat: no sudden dips or humps. Hybrid is rigid, so it bridges small dips, but bigger ones can leave a spot that feels soft underfoot.
How to check your floor in 10 minutes
Use a long straight piece of timber or aluminium, ideally 2 to 3 metres.
Lay it on the floor in a few directions: along, across and corner to corner.
Look for gaps under the edge. A ruler or a stack of coins helps you measure.
Mark any dips or humps with tape.

What if it's not flat enough?
It's very common, and easy to fix before the floor goes down.
Over old tiles
Hybrid can often go over existing tiles if they're solid and flat. Deep grout lines may need filling first. Read can you install hybrid over tiles.
Why it matters
A solid feel underfoot. No soft spots or hollow sounds.
Tight joints. Click joints stay locked when every plank is supported.
Warranty. Flatness is part of most install guides.

Next steps
Book a free measure and quote. We'll check flatness and tell you what's needed.
Read our prep checklist for a new floor.



Comments