top of page

Sand Your Old Floorboards or Install Hybrid? How to Decide

Nov 9
3 min read

Quick answer: If your old boards are a hardwood in good shape, fairly flat, and you love their character, sanding and polishing can bring them back. If they're patchy, painted, gappy, pine, or you want a different colour or a tougher, low-maintenance finish, a new SPC hybrid floor can go straight over the top of sound boards in a day or two. Hybrid gives you a 100% waterproof core, a scratch-resistant wear layer and any colour you like, from $26.01/m² (supply only, ex GST, as at November 2026).

First, look at what you've got

Lift a corner of the carpet or step back and take a good look:

  • Timber type: hardwoods (like spotted gum, blackbutt or jarrah) are hard and sand back beautifully. Softer pine marks more easily.

  • Condition: lots of paint, stains, patches or replaced boards can show through after sanding.

  • Flatness: cupped or uneven boards may need a heavy sand.

  • Colour: sanding brings back the timber's natural colour. If you want a different look, staining has limits.

When sanding is a great choice

  • Hardwood boards in good condition with few patches.

  • You love the original look and the character of the old timber.

  • You're happy with the timber's natural colour and the upkeep of a coated timber floor.

When a new hybrid floor makes more sense

  • You want a different colour: go from orange pine to a natural oak, coastal blackbutt or spotted gum look.

  • The boards are patchy or painted: a new floor gives you a clean, consistent finish.

  • You want it tough and easy: hybrid's wear layer handles kids, pets and chair legs, and the core is 100% waterproof, so kitchens are no stress.

  • You want it quick: hybrid floats over sound, flat boards, so there's no sanding dust and you can be back in your home fast.

  • You want quieter, warmer floors: many hybrids have an attached underlay that softens footsteps on old timber floors.

Homestead Chestnut SPC hybrid, installed by Reno Flooring in Grafton NSW
Homestead Chestnut SPC hybrid, installed by Reno Flooring in Grafton NSW

Can hybrid go straight over old floorboards?

Yes, in most homes. The boards need to be firmly fixed and reasonably flat. Any loose boards are screwed down, high spots are planed and low spots are filled, and then the hybrid floats over the top. In older homes on stumps, this is one of the most popular upgrades we do. Our guide to flooring for older Grafton homes on stumps shows how it's done.

What does each option cost for 60 m²?

  • New 6.5mm SPC hybrid: about 65 m² (with cuts) × $26.01 = about $1,691 supply only, ex GST

  • New 9.5mm SPC hybrid: about 65 m² × $38.25 = about $2,486 supply only, ex GST

  • Sanding and polishing: priced by a floor sanding specialist after they've seen your boards.

Prices are as at November 2026 and change with our sales. Installed hybrid prices come from a free measure and written quote, where we check your boards and tell you exactly what prep is needed.

Fertile Oak SPC hybrid, styled in a Federation-style living room
Fertile Oak SPC hybrid, styled in a Federation-style living room

A simple way to decide

Ask yourself three questions:

  1. Do I love the colour and character of these boards as they are? If yes, sanding is worth a look.

  2. Do I want a different colour or a tougher, low-fuss finish? If yes, hybrid is the easier path.

  3. How quickly do I need the rooms back? Hybrid is usually faster and cleaner.

Next steps

 
 
 

Comments


Ready when you are

Measured, quoted and installed.

Book a free measure and we’ll come to you, check the subfloor and give you a written quote. No obligation.

Free samples

See it in your own light.

Order up to 3 free samples and compare them at home, next to your walls and furniture.

bottom of page