top of page

Do You Need a Moisture Barrier Under Hybrid Flooring?

Nov 9
2 min read

Updated: Nov 11

Quick answer: On a concrete slab, laying a 200μm moisture barrier film under hybrid flooring is a simple, low-cost optional extra that gives you more protection. The hybrid's SPC core is already 100% waterproof; the film adds protection underneath, between the slab and the floor's attached underlay. One roll of our moisture barrier covers 100 m² for $100 (supply only, ex GST, as at November 2026), so it adds about $1 per m² to your floor.

What a moisture barrier does

Concrete slabs can hold a little moisture, especially in newer homes and humid coastal areas. A moisture barrier is a thin, tough plastic sheet laid over the slab before the floor goes down. It:

  • Adds a protective layer between the concrete and the underside of your floor.

  • Helps the floor float smoothly, because the planks glide over the film as they're clicked together.

  • Costs very little for the peace of mind it gives.

Spotted Gum SPC hybrid, installed by Reno Flooring in a yoga studio
Spotted Gum SPC hybrid, installed by Reno Flooring in a yoga studio

When is it used?

  • Concrete slabs: the most common place. It's an optional extra we recommend on ground-floor slabs.

  • New homes and extensions: fresh slabs are a great place for the extra protection.

  • Over plywood or timber subfloors: some installers also lay a film here to help the planks float freely.

  • Over existing tiles: usually the tiles already act as a barrier, but your installer will advise on the day.

How it's installed

  1. Clean the floor: the slab is swept and vacuumed so nothing sits under the film.

  2. Roll it out: the film is rolled across the room in strips.

  3. Overlap and tape the joins: each strip overlaps the next, and the joins are taped so it's one continuous layer.

  4. Turn it up at the walls: the edges run a little up the wall and are hidden behind the skirting or scotia.

  5. Install the floor on top: the hybrid (with its attached underlay) floats over the film.

QLD Spotted Gum SPC hybrid, installed by Reno Flooring in Nambucca Heads NSW
QLD Spotted Gum SPC hybrid, installed by Reno Flooring in Nambucca Heads NSW

What does it cost for 60 m²?

  • SPC hybrid from $26.01/m²: about 65 m² with cuts = about $1,691 supply only, ex GST

  • Moisture barrier film: one roll covers 100 m² = $100 supply only, ex GST

Prices are as at November 2026 and change with our sales. Add the moisture barrier film to your order, or our flooring calculator can include it for you. On a supply and install job, your written quote will show exactly what's included.

Laminate and other floors

Laminate and some other floors use a separate foam underlay rather than an attached one. For those, a combined underlay with a built-in foil or film layer does the same job. Ask us which suits your floor.

Next steps

 
 
 

Comments


Ready when you are

Measured, quoted and installed.

Book a free measure and we’ll come to you, check the subfloor and give you a written quote. No obligation.

Free samples

See it in your own light.

Order up to 3 free samples and compare them at home, next to your walls and furniture.

bottom of page