top of page

How to Clean Hybrid Flooring: The Simple Routine That Keeps It Looking New

Nov 7
3 min read

Quick answer: Sweep or vacuum hybrid flooring every day or two, and damp-mop it once a week with a well-wrung microfibre mop and a pH-neutral floor cleaner. That's it. Skip steam mops, wax and polish, and your hybrid will keep looking new for years.

Why hybrid is so easy to clean

A hybrid floor has a tough, sealed wear layer on top and a 100% waterproof core underneath. There's no timber to oil, no grout to scrub and no polish to keep up. Dirt sits on the surface, so a quick sweep and a damp mop do the job.

The routine

  • Every day or two: sweep with a soft broom, or vacuum on the hard-floor setting. Sand and grit are what wear floors down, so getting them off is the most useful thing you can do.

  • Once a week: damp-mop with a microfibre mop and warm water with a little pH-neutral floor cleaner. Wring the mop until it's just damp, and work along the boards.

  • Straight away: wipe up spills with a soft cloth. Hybrid's waterproof core means a spill isn't a worry, but sticky drinks are easier to wipe up while they're fresh.

  • Every few months: clean under rugs and furniture, and check your felt pads are still in place.

Fertile Oak SPC hybrid, installed by Reno Flooring near Woolgoolga NSW
Fertile Oak SPC hybrid, installed by Reno Flooring near Woolgoolga NSW

What to use

  • A soft broom or vacuum with a hard-floor head. Turn off the spinning brush bar if yours has one.

  • A flat microfibre mop. It picks up fine dust and needs very little water.

  • A pH-neutral floor cleaner. Look for one made for vinyl, hybrid or sealed floors, and mix it as the bottle says. More cleaner doesn't mean cleaner floors, it just leaves a film.

  • Warm water. On most days, a damp microfibre mop and warm water is all you need.

What to skip

  • Steam mops. A damp microfibre mop does a better job and is kinder to the floor's surface.

  • Wax, polish and "shine" products. Hybrid already has its finish. Extra layers just go cloudy.

  • Bleach, ammonia and harsh solvents. A gentle cleaner works just as well.

  • Scourers and steel wool. For a stubborn mark, use a soft cloth and a little cleaner instead.

Stubborn marks

  • Scuffs from shoes: rub gently with a dry microfibre cloth or a tennis ball.

  • Sticky spots: a cloth dampened with warm water and a drop of pH-neutral cleaner, then wipe dry.

  • Paint, glue or marker: dab with a cloth and a little methylated spirits, then wipe with clean water. Try it on a hidden spot first.

Keep it looking new

  • Doormats at every outside door. They stop most of the grit before it gets inside, which matters most in beach and country homes.

  • Felt pads under furniture legs, and lift heavy furniture rather than dragging it.

  • Chair mats under office chairs with hard castors.

  • Blinds or curtains on big sunny windows to keep the colour even over the years.

Choosing a floor and want the toughest one for a busy home? A 0.5mm wear layer is the one to look for. See what wear layer you need and our hybrid flooring range.

Coastal Blackbutt SPC hybrid close-up, installed by Reno Flooring in Minnie Water NSW
Coastal Blackbutt SPC hybrid close-up, installed by Reno Flooring in Minnie Water NSW

Read more

Next steps

 
 
 

Comments


Ready when you are

Measured, quoted and installed.

Book a free measure and we’ll come to you, check the subfloor and give you a written quote. No obligation.

Free samples

See it in your own light.

Order up to 3 free samples and compare them at home, next to your walls and furniture.

bottom of page