top of page

Buying Hybrid Flooring to Install Yourself: What to Check First

Nov 9
3 min read

Quick answer: Before you buy hybrid flooring to install yourself, work out how much you need (plus 5 to 10% extra), make sure your boxes come from the same batch, add the trims and accessories, check your subfloor is flat, and read the installation guide for acclimatising and tools. Our SPC hybrid is available supply only from $26.01/m² (ex GST, as at November 2026), delivered Australia-wide.

1. Measure and order 5 to 10% extra

Measure each room (length × width) and add them up. Then add extra for cuts and offcuts:

  • Straight planks in simple rooms: about 5 to 10% extra.

  • Lots of corners, hallways or angled walls: lean towards 10%.

  • Herringbone: allow more, as there are more cuts.

Our flooring calculator turns your measurements into boxes. Ordering a little extra also leaves you a few spare boards for future repairs.

2. Order it all at once, from the same batch

Floors are made in batches, and colour can vary slightly from one batch to the next. Ordering the whole job in one go keeps every box from the same batch, so the floor looks consistent from room to room.

3. Don't forget the trims and accessories

  • Scotia to cover the expansion gap at the walls if your skirting stays (from $11.82 per length).

  • T-moulding or reducer for doorways and where the floor meets another surface ($13.64 per 2.4m length, about two doorways).

  • Moisture barrier as optional extra protection over concrete ($100 per 100 m² roll).

All prices are supply only, ex GST, as at November 2026. Our guide to removing skirting boards for new flooring explains scotia vs skirting.

Fertile Oak SPC hybrid, installed by Reno Flooring near Woolgoolga NSW
Fertile Oak SPC hybrid, installed by Reno Flooring near Woolgoolga NSW

4. Check your subfloor

Hybrid floats over most firm, flat subfloors: concrete, timber floorboards, sheet flooring and many existing hard floors. The key word is flat. Check the flatness tolerance in the installation guide for your range, and fix any high spots, dips or loose boards first. Carpet and its underlay always need to come up.

5. Read the installation guide before the boxes arrive

Every range has its own installation guide. It covers acclimatising the boxes in the room, the expansion gap at walls, how far the floor can run before it needs a break, and which rooms it suits. Read it before you start so there are no surprises.

6. Gather your tools

Most DIYers need:

  • tape measure, pencil and square

  • a sharp utility knife or a saw for cuts

  • spacers for the expansion gap

  • a tapping block and pull bar

  • a rubber mallet

  • knee pads (your knees will thank you)

7. Plan for delivery

We deliver Australia-wide. Delivery is usually 1 to 2 business days in metro areas and 2 to 5 business days in regional areas. We'll call before delivery to arrange it, and someone needs to be there to receive the order. Flooring boxes are heavy, so have a dry, flat spot ready to stack them.

NSW Spotted Gum SPC hybrid, installed by Reno Flooring in Grafton NSW
NSW Spotted Gum SPC hybrid, installed by Reno Flooring in Grafton NSW

What does it cost for 60 m²?

For a 60 m² area with straight planks, order about 65 m².

  • 6.5mm SPC hybrid from $26.01/m²: 65 m² × $26.01 = about $1,691 supply only, ex GST

  • 9.5mm SPC hybrid from $38.25/m²: 65 m² × $38.25 = about $2,486 supply only, ex GST

Prices are as at November 2026 and change with our sales, so check the live price on each colour.

Next steps

 
 
 

Comments


Ready when you are

Measured, quoted and installed.

Book a free measure and we’ll come to you, check the subfloor and give you a written quote. No obligation.

Free samples

See it in your own light.

Order up to 3 free samples and compare them at home, next to your walls and furniture.

bottom of page