
ROOM GUIDE · BATHROOMS & LAUNDRIES
Flooring for bathrooms and laundries
Only one floating floor belongs in a wet room, and it's hybrid. The core is stone-plastic composite, so water can sit on it without the boards swelling. Laminate and engineered timber stay out of bathrooms and laundries, whatever the box says about water resistance. Here is what works, what doesn't, and how to do it properly.
01
Why hybrid, and only hybrid
Laminate has a fibreboard core. It resists spills on the surface for a few hours, but standing water at the joins gets in and the core swells. Engineered oak is real timber on plywood; it moves with humidity and marks with water. Hybrid's SPC core doesn't absorb water, doesn't swell, and doesn't grow mould inside the board. For a bathroom, ensuite, powder room or laundry, that's the end of the comparison.
02
The one rule: floor drains
A floating floor needs an expansion gap at every wall, which means it can't be siliconed into a room that has a floor waste. If your bathroom or laundry has a drain in the floor and gets wet to the point of needing it, that room stays tiled. Where hybrid works is the far more common case: a powder room, an ensuite where the shower is screened, a laundry where water goes into the tub, and the hallways and kitchens that lead to them. If you're not sure, send us a photo of the room.
03
Over the existing tiles
This is the most common bathroom and laundry job we do. The old tiles stay down, which keeps the waterproofing membrane under them intact. The hybrid floats on top, grout lines and all, as long as the tiles are flat and solid. No jackhammer, no dust, no re-waterproofing. Read the full guide: flooring over existing tiles.
04
Sealing the edges
Around the bath, the shower screen and the vanity, the expansion gap gets a flexible wet-area silicone instead of scotia, so water can't run under the floor. Along the walls, scotia or skirting covers the gap as usual. Under the toilet, the floor is cut around the pan and sealed.
05
Laundries: supply only
We supply hybrid for laundries but our team doesn't install in them, because almost every laundry has a floor waste and a washing machine that can flood. If you install it yourself, keep the gap, seal the edges, and put a drip tray under the machine. The manufacturer's guide in every box covers wet areas.
06
Best hybrids for small wet rooms
Elegant Coastal Blackbutt 6.5mm — light and warm, 0.5mm wear layer, the colour most people choose for an ensuite.
Guardian 6.5mm — the best seller, in greys and oaks that make a small room feel bigger.
Duro 9.5mm — thicker board for the step-down from a hallway so the levels match.
All hybrid: see the full range. Prices per m² ex GST on each page; work out boxes with the calculator.
07
Bathroom and laundry flooring questions
Is hybrid flooring really waterproof?
Yes, through the core. Water on top or at the joins doesn't swell it. What you still manage is water getting under the floor, which is why the edges in a wet room are sealed.
Can hybrid go in the shower?
No. The shower base and its screened area stay tiled or stay as the shower base. Hybrid runs up to the screen and is sealed there.
Can I put hybrid over bathroom tiles?
Usually yes, if they're flat and sound. It's the best way to update a bathroom floor without touching the waterproofing underneath.
Do I need to remove the toilet?
For the cleanest finish, yes: lift the pan, floor through, refit with a new seal. It can be cut around in place, with silicone at the base, if lifting isn't possible.
What about the laundry?
Supply only. Hybrid suits it, but the floor waste and the washing machine mean we leave the installation to you or your installer, with the edges sealed.
Can laminate go in a bathroom?
No. Laminate is water-resistant on the surface, not waterproof, and we don't sell it for wet rooms.